Peoria, IL. Drywall Hangers, Drywall Finishers, Tapers

Our Drywall Installation Is Not Cheap.
If You Are Wanting the Very Best (Most Expensive, Top Quality)
Contact Us, Here.
Peoria Painting company
​







​
​

​Do You Need Drywall Hanging / Finishing Services? 
​
Does your new project need drywall installed? Need drywall hanging performed or Finishing done? We can help. Drywall hanging and finishing is a 2 part process. So much so that they are two entirely different trades almost. In that 90% of all drywall tradesman either hang or tape and they don't do both. Here's where we're different. We have both hangers and tapers who work full time and stay very, very busy. No need to find them both when you hire us. We hang and tape. We are the best choice for a drywall company in Central Illinois.

Having performed over 6,000 drywall and painting projects we have worked with the best and brightest, most accomplished builders in the area. Our experience is undeniably Awesome!

When looking for a skilled drywall contractor you will want the following results.
  • Peoria Drywall Hanging: A thorough sheet count is necessary prior to the start of any drywall project and it is in your best interest to hire someone who will not be wasteful with your money or materials. A sloppy sheet count can be a major waste of money and materials if you are not careful. We meticulously count every stud for a lean and mean sheet count. Getting it almost exact with very few sheets left over and hardly any scrap or wasted product. You are looking for tight fitting joints and corners. Tight cut out of all doors, windows, can lights and electrical boxes. Lastly, the screw pattern must be proper. Which usually in a 4 ft. sheet is 3 in the field and one on either end of the board. These are our standards and are well respected in the Los Angeles area.
  • Peoria Drywall Finishers: First you want any gaps pre filled. Next paper taping of all of the butt joints. Then the flats, followed by the inside corners. The inside corner will be done with a roller and glazer / angle head. Next you would hang the bead and apply the first coat of joint compound or mud. Followed by two more coats depending on the level of finish. Lastly the job is either primed and or a walkthrough is performed with the customer. A light is used to ensure your total satisfaction. These are our steps and steps you will want your contractor to take should you want an amazing product. Don't take a chance on any other company. We guarantee you will be completely satisfied or we'll make it right. ​​​Call for a Free Estimate Today.

309.686.8018

309.686.8018